1
/
2
Σύνδεσμος αγγελίας:
car.gr/55738387
Feuling Feuling, OE+ cam support plate. Conversion
396,78 €
Χαρακτηριστικά
Τίτλος
Feuling Feuling, OE+ cam support plate. Conversion
Κατάσταση
Καινούργιο
Τιμή
396,78 €
Κατηγορία
Ανταλλακτικά Μοτοσυκλετών - Αναβάτη - Εκκεντροφόροι
Εσωτερικός κωδικός καταστήματος
Car-707241
Feuling Feuling, OE+ cam support plate. Conversion
396,78 €
FeulingFeuling, OE+ cam support plate. Conversion 707241 fits 99-06 Twin Cam (excl. 2006 Dyna). Models that were converted from sock mechanical to 06-17 hydrail cam chain tensioners (NU) Conversion cam plate used for 99-06 models that run the stock chain drive camshafts, that have been converted from the 99-06 mechanical chain tensioners to 06-17 hydraulic chain tensioners. Cam plate includes bearing retainer plate and hardware. For use with stock 07-17 style oil pumps, also compatible with Feuling oil pumps: 707380, 566076, 707384 . Note: Requires purchase of OEM style hydraulic chain drive tensioners, chains, sprockets & hardware. FEULING OE+ stock replacement billet cam plates are manufactured from 6061 aluminum providing increased rigidity and machined to Feuling's high tolerance standards. The pressure relief valve and spring are pre-set, matched and seated by Feuling with a full pop off pressure of 50-60 psi. OE+ cam plates are a direct bolt in replacement and will accept the factory oil pump. As with all FEULING components, the competitively priced OE+ cam plates are designed and manufactured to the highest standard of quality with proven Feuling performance. This kit has the original style 99-06 Twin Cam cam bearing bores for use with the press in bearings. This cam plate is designed to use the new style 07-17 OEM hydraulic chain tensioner system with the original 99-06 Twin Cam style camshafts. Great for those who have already upgraded their early style engine and or like their existing camshafts. Requires the purchase of 06-17 OEM style hydraulic chain drive tensioners and required hardware. Note: 99-01 engines with Magneti Marelli ignition utilize the stock outer silent chain and rear cam sprocket or will require separate purchase of Andrews sprocket 503707 which will allow use of the 07-17 style roller chain. Δείτε περισσότερα στον κατάλογο Home > Parts > Engine > Lower End > Cams > Cam Plates & Kits > Feuling, OE+ cam support plate. Conversion
396,78 €
Αρ. αγγελίας:
Χαρακτηριστικά
Τίτλος
Feuling Feuling, OE+ cam support plate. Conversion
Τιμή
396,78 €
Κατάσταση
Καινούργιο
Εσωτερικός κωδικός καταστήματος
Car-707241
Τελευταία αλλαγή
27 ημέρες πριν
Σύνδεσμος
Υπολογισμός δανείου
Χρηματοδότηση με
Από
Ποσό δανείου
396,78
€
Μηνιαία δόση
45.06 €
300 €
396 €
Η χρηματοδότηση παρέχεται από την
tbi bank
και όχι από τον
πωλητή της αγγελίας
.
Το τελικό επιτόκιο προσωποποιείται και μπορεί να διαφέρει.
Προσωπικό δάνειο έως 10,000 EUR για να κάνεις όποια αγορά θέλεις
Κατάθεση χρημάτων άμεσα στον Ελληνικό τραπεζικό σου λογαριασμό
Εύκολη και 100% online διαδικασία, χωρίς επίσκεψη σε φυσικό κατάστημα
Σταθερό επιτόκιο από 9.9%
Χωρίς εγγύηση και κρυφές χρεώσεις
Περιγραφή
FeulingFeuling, OE+ cam support plate. Conversion 707241 fits 99-06 Twin Cam (excl. 2006 Dyna). Models that were converted from sock mechanical to 06-17 hydrail cam chain tensioners (NU) Conversion cam plate used for 99-06 models that run the stock chain drive camshafts, that have been converted from the 99-06 mechanical chain tensioners to 06-17 hydraulic chain tensioners. Cam plate includes bearing retainer plate and hardware. For use with stock 07-17 style oil pumps, also compatible with Feuling oil pumps: 707380, 566076, 707384 . Note: Requires purchase of OEM style hydraulic chain drive tensioners, chains, sprockets & hardware. FEULING OE+ stock replacement billet cam plates are manufactured from 6061 aluminum providing increased rigidity and machined to Feuling's high tolerance standards. The pressure relief valve and spring are pre-set, matched and seated by Feuling with a full pop off pressure of 50-60 psi. OE+ cam plates are a direct bolt in replacement and will accept the factory oil pump. As with all FEULING components, the competitively priced OE+ cam plates are designed and manufactured to the highest standard of quality with proven Feuling performance. This kit has the original style 99-06 Twin Cam cam bearing bores for use with the press in bearings. This cam plate is designed to use the new style 07-17 OEM hydraulic chain tensioner system with the original 99-06 Twin Cam style camshafts. Great for those who have already upgraded their early style engine and or like their existing camshafts. Requires the purchase of 06-17 OEM style hydraulic chain drive tensioners and required hardware. Note: 99-01 engines with Magneti Marelli ignition utilize the stock outer silent chain and rear cam sprocket or will require separate purchase of Andrews sprocket 503707 which will allow use of the 07-17 style roller chain. Δείτε περισσότερα στον κατάλογο Home > Parts > Engine > Lower End > Cams > Cam Plates & Kits > Feuling, OE+ cam support plate. Conversion
Χώρος Διαφήμισης
Έμπορος
Έμπορος στο car.gr από 22-10-2010
