1
/
3
Σύνδεσμος αγγελίας:
car.gr/342640755
Καρμπυρατερ Evolution Cp Ø21Mm 201.2104 | Polini
230,70 €
Χαρακτηριστικά
Τίτλος
Καρμπυρατερ Evolution Cp Ø21Mm 201.2104 | Polini
Κατάσταση
Καινούργιο
Τιμή
230,70 €
Κατηγορία
Ανταλλακτικά Μοτοσυκλετών - Αναβάτη - Λαιμοί Καρμπυρατέρ
Εσωτερικός κωδικός καταστήματος
Car-1125996
Εργοστασιακός κωδικός
201.2104
Μάρκα/μοντέλο οχήματος
MBK
MACH-G LIQUID
2002 - 2015
Piaggio
ZIP 50 2T SP E1
1996 - 2005
Piaggio
ZIP 50 2T SP E2
2006 - 2013
Yamaha
JOG 50 RR
2002 - 2015
Διαθεσιμότητα:
Κατόπιν παραγγελίας / 1-5 Εργάσιμες ημέρες
Κατασκευαστής:
POLINI
Καρμπυρατερ Evolution Cp Ø21Mm 201.2104 | Polini
230,70 €
Ø 21 POLINI CP EVOLUTION CARBURETOR. PURE ENERGY The Ø 21 Polini CP Evolution Carburetor has been studied to exploit at the best the racing engines and it achieves the best performance between 12.000 and 15.000 rpm. The main feature is the working of the intake pipe made by the CNC machines that exploits at the best the gases flow. The manifold coupling is of Ø 28,5: this feature gives the possibility to fit a proper manifold that better exploit the air brought by the new Ø 21 Polini CP Evolution carburetor. The carburetor is supplied with a flange to adapt the Polini Evolution filter with bigger diameter too. The inlet pipe is very short and it features an exclusive concentric design and a geometry that optimize the air flows when the gases pass through. The overflow of petrol in the atomizer has been studied to ensure correct flow dynamic at every position of the throttle valve when opens. The hole where the petrol enters and the larger needle allow the constant draft even in the most extreme conditions. The float level, completely made of plastic, and the needle seal are carefully controlled in the production department to ensure the same standard of efficiency over time. These features considerably simplify the setup of the carburetor. Thanks to the extremely sophisticated calibration, the petrol-air flows, main and low jets, have been designed to achieve the best performance with lower consumption. The compact size of the new carburetor is the result of a careful and meticulous management of the inner space and the maximum efficiency of all the components, subjected to strict controls. A prestigious project like this has required a deep synergy of competences in this field. An extraordinary teamwork between the technical and the racing department to reach the goal which is visible to everybody: a technologically advanced product and of absolute reliability. Carburetor Part number. 201.2104 100% Made In Italy EVOLUTION CARBURETTORS ARE INTENDED SOLELY FOR COMPETITION USE: REMOVE THE EXHAUST MIXER AND THE DEPRESSION PETROL COCK CONTROL. Main Jet 114 Low Jet 40 Needle 12/22 Valve 25x40 Atomizer Bush d.2,7
230,70 €
Αρ. αγγελίας:
Χαρακτηριστικά
Τίτλος
Καρμπυρατερ Evolution Cp Ø21Mm 201.2104 | Polini
Τιμή
230,70 €
Κατάσταση
Καινούργιο
Εσωτερικός κωδικός καταστήματος
Car-1125996
Εργοστασιακός κωδικός
201.2104
Μάρκα/μοντέλο οχήματος
MBK
MACH-G LIQUID
2002 - 2015
Piaggio
ZIP 50 2T SP E1
1996 - 2005
Piaggio
ZIP 50 2T SP E2
2006 - 2013
Yamaha
JOG 50 RR
2002 - 2015
Διαθεσιμότητα:
Κατόπιν παραγγελίας / 1-5 Εργάσιμες ημέρες
Κατασκευαστής:
POLINI
Τελευταία αλλαγή
7 ημέρες πριν
Σύνδεσμος
Περιγραφή
Ø 21 POLINI CP EVOLUTION CARBURETOR. PURE ENERGY The Ø 21 Polini CP Evolution Carburetor has been studied to exploit at the best the racing engines and it achieves the best performance between 12.000 and 15.000 rpm. The main feature is the working of the intake pipe made by the CNC machines that exploits at the best the gases flow. The manifold coupling is of Ø 28,5: this feature gives the possibility to fit a proper manifold that better exploit the air brought by the new Ø 21 Polini CP Evolution carburetor. The carburetor is supplied with a flange to adapt the Polini Evolution filter with bigger diameter too. The inlet pipe is very short and it features an exclusive concentric design and a geometry that optimize the air flows when the gases pass through. The overflow of petrol in the atomizer has been studied to ensure correct flow dynamic at every position of the throttle valve when opens. The hole where the petrol enters and the larger needle allow the constant draft even in the most extreme conditions. The float level, completely made of plastic, and the needle seal are carefully controlled in the production department to ensure the same standard of efficiency over time. These features considerably simplify the setup of the carburetor. Thanks to the extremely sophisticated calibration, the petrol-air flows, main and low jets, have been designed to achieve the best performance with lower consumption. The compact size of the new carburetor is the result of a careful and meticulous management of the inner space and the maximum efficiency of all the components, subjected to strict controls. A prestigious project like this has required a deep synergy of competences in this field. An extraordinary teamwork between the technical and the racing department to reach the goal which is visible to everybody: a technologically advanced product and of absolute reliability. Carburetor Part number. 201.2104 100% Made In Italy EVOLUTION CARBURETTORS ARE INTENDED SOLELY FOR COMPETITION USE: REMOVE THE EXHAUST MIXER AND THE DEPRESSION PETROL COCK CONTROL. Main Jet 114 Low Jet 40 Needle 12/22 Valve 25x40 Atomizer Bush d.2,7
Χώρος Διαφήμισης
Έμπορος
Motofix.gr
Υπερκατάστημα Aftermarket ανταλλακτικών για Μοτοσυκλέτες (Motocross & Street & ), Scooter, ATV, Jet-Ski και Snowmobiles
-Πάνω απο 120,000 μοναδικοί κωδικοί σε περιμένουν online
-Δωρεάν μεταφορικά άνω των 100€
-Τεχνική υποστήριξη
-Ασύγκριτη εξυπηρέτηση πελατών
-Λιανικές και Χονδρικές πωλήσεις
ΑΝΑΝΕΩΜΕΝΟ & ΕΝΗΜΕΡΩΜΕΝΟ E-SHOP
Βρες χιλιάδες ανταλλακτικά στο e-shop μας: https://www.motofix.gr/
ΚΑΛΕΣΕ ΜΑΣ για οποιαδήποτε ερώτηση στο 2314 071055 !
Δευτέρα - Παρασκευή: 09:00 - 18:00
Ελπίδος 96, Πολίχνη, 56533, Θεσσαλονίκη
Ώρες λειτουργίας:
Δευτέρα-Παρασκευή 09:00-18:00