1 / 3
MotionPro, Bearing puller collet, 10 mm
71,01 €
- Compatible with Motion Pro 722420 slide hammer - Collets are used to pull bearings that you can\'t reach from the rear side - Innovative new floating ball design delivers much greater holding force on bearing - Slit collet and driver are precision machined from tool steel and heat treated for strength and durability - The superior workmanship; materials and design distinguish this tool from low-cost versions - Pull tests show collets are 2x to 3x stronger than conventional collets - Internal threads for slide hammer attachment is M12-1.75 - Collets are sold individually as 722606 8mm; 722607 10mm; 722413 12mm; 722414 15mm; 722416 20mm; 722417 25mm; 722418 30mm; 722419 35mm Note: Use adapter 722605 (not included) for use with the old Motion Pro slide hammer with ½-12 threads Note: The 35mm collet (722419) is sized to fit the difficult to reach inner hub bearing on Yamaha R6; R1; FZ1; FZ6; R6S and V-Max 1700 Note: Also available as complete kit; with slide hammer and all 9 collet sizes as MCS 701699
Αρ. αγγελίας:
Χαρακτηριστικά
Τίτλος
MotionPro, Bearing puller collet, 10 mm
Τιμή
71,01 €
Κατάσταση
Καινούργιο
Κατηγορία
Εσωτερικός κωδικός καταστήματος
Car-1427783
Εργοστασιακός κωδικός
722607
Κατασκευαστής
MOTION PRO
Τελευταία αλλαγή
3 μήνες πριν
Σύνδεσμος
Περιγραφή
- Compatible with Motion Pro 722420 slide hammer - Collets are used to pull bearings that you can\'t reach from the rear side - Innovative new floating ball design delivers much greater holding force on bearing - Slit collet and driver are precision machined from tool steel and heat treated for strength and durability - The superior workmanship; materials and design distinguish this tool from low-cost versions - Pull tests show collets are 2x to 3x stronger than conventional collets - Internal threads for slide hammer attachment is M12-1.75 - Collets are sold individually as 722606 8mm; 722607 10mm; 722413 12mm; 722414 15mm; 722416 20mm; 722417 25mm; 722418 30mm; 722419 35mm Note: Use adapter 722605 (not included) for use with the old Motion Pro slide hammer with ½-12 threads Note: The 35mm collet (722419) is sized to fit the difficult to reach inner hub bearing on Yamaha R6; R1; FZ1; FZ6; R6S and V-Max 1700 Note: Also available as complete kit; with slide hammer and all 9 collet sizes as MCS 701699
Έμπορος
Έμπορος στο car.gr από 19-09-2011
IRON HORSES ΑΝΤΑΛΛΑΚΤΙΚΑ ΑΞΕΣΟΥΑΡ SERVICE HARLEY DAVIDSON
ΚΑΘΗΜΕΡΙΝΑ ΑΝΤΑΛΛΑΚΤΙΚΑ ΑΝΤΙΚΑΤΑΒΟΛΗ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ ΑΥΘΗΜΕΡΟΝ.
ΠΡΟΣΟΧΗ! ΟΙ ΤΙΜΕΣ ΜΠΟΡΟΥΝ ΝΑ ΜΕΤΑΒΛΗΘΟΥΝ ΧΩΡΙΣ ΕΝΗΜΕΡΩΣΗ ΚΑΝΟΥΜΕ
ΟΤΙ ΜΠΟΡΟΥΜΕ ΓΙΑ ΝΑ ΚΡΑΤΗΣΟΥΜΕ ΕΝΗΜΕΡΩΜΕΝΕΣ ΤΙΣ ΑΓΓΕΛΙΕΣ ΜΑΣ!
Ώρες λειτουργίας:
ΔΕΥΤΕΡΑ ΕΩΣ ΠΑΡΑΣΚΕΥΗ ΑΠΟ ΤΙΣ 10:00 ΕΩΣ ΤΙΣ 18:00 ΚΑΙ ΣΑΒΒΑΤΟ ΑΠΟ ΤΙΣ 10:00 ΕΩΣ ΤΙΣ 14:00
Επικοινωνία