1
/
2
Σύνδεσμος αγγελίας:
car.gr/54787604
Kukko, separator with quick clamp spindle
193,84 €
Χαρακτηριστικά
Τίτλος
Kukko, separator with quick clamp spindle
Κατάσταση
Καινούργιο
Τιμή
193,84 €
Κατηγορία
Αξεσουάρ & Εξαρτήματα Εργαλείων
Εσωτερικός κωδικός καταστήματος
Car-1365074
Εργοστασιακός κωδικός
951077
Κατασκευαστής
Kukko 
Kukko, separator with quick clamp spindle
193,84 €
With quick clamp pressure spindle. Used with hand tools to pull ball bearings; roller bearings and inner races from a shaft where the bearing is installed tightly to another surface; so there is not enough room to use regular pulling jaws. When tightened; the bearing separator will pinch-in between the bearing and the surface making it possible to pull the bearing from the shaft. Note: Note: 951077 bearing separator will require the use of 951040 puller. Separator and puller are sold separately. - Build Series: 17 - Diameter of Shaft: 12-75mm - Side Screw Length: 75mm - Weight: 1.465kg - Space Below: 0mm - Space Next To It: 75mm - Spread: 12-75mm - Dept: 200mm - With quick-clamping pressure spindle - The sharp blades enable flush parts to be removed where pulling jaws cannot be used - The wedge-shaped separator jaws are secured underneath the component to be removed - The large supporting surfaces protect the parts to be pulled - For use with build series 18 puller - Easy to use; as the separator jaws are quickly and centrally tensioned with just one pressure spindle - Ultimate stability when removing; as the separator and pulling device are screwed firmly together
193,84 €
Αρ. αγγελίας:
Χαρακτηριστικά
Τίτλος
Kukko, separator with quick clamp spindle
Τιμή
193,84 €
Κατάσταση
Καινούργιο
Κατηγορία
Εσωτερικός κωδικός καταστήματος
Car-1365074
Εργοστασιακός κωδικός
951077
Κατασκευαστής
Kukko
Τελευταία αλλαγή
1 μήνας πριν
Σύνδεσμος
Περιγραφή
With quick clamp pressure spindle. Used with hand tools to pull ball bearings; roller bearings and inner races from a shaft where the bearing is installed tightly to another surface; so there is not enough room to use regular pulling jaws. When tightened; the bearing separator will pinch-in between the bearing and the surface making it possible to pull the bearing from the shaft. Note: Note: 951077 bearing separator will require the use of 951040 puller. Separator and puller are sold separately. - Build Series: 17 - Diameter of Shaft: 12-75mm - Side Screw Length: 75mm - Weight: 1.465kg - Space Below: 0mm - Space Next To It: 75mm - Spread: 12-75mm - Dept: 200mm - With quick-clamping pressure spindle - The sharp blades enable flush parts to be removed where pulling jaws cannot be used - The wedge-shaped separator jaws are secured underneath the component to be removed - The large supporting surfaces protect the parts to be pulled - For use with build series 18 puller - Easy to use; as the separator jaws are quickly and centrally tensioned with just one pressure spindle - Ultimate stability when removing; as the separator and pulling device are screwed firmly together
Χώρος Διαφήμισης
Έμπορος
IRON HORSES ΑΝΤΑΛΛΑΚΤΙΚΑ ΑΞΕΣΟΥΑΡ SERVICE HARLEY DAVIDSON
ΚΑΘΗΜΕΡΙΝΑ ΑΝΤΑΛΛΑΚΤΙΚΑ ΑΝΤΙΚΑΤΑΒΟΛΗ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ ΑΥΘΗΜΕΡΟΝ.
ΠΡΟΣΟΧΗ! ΟΙ ΤΙΜΕΣ ΜΠΟΡΟΥΝ ΝΑ ΜΕΤΑΒΛΗΘΟΥΝ ΧΩΡΙΣ ΕΝΗΜΕΡΩΣΗ ΚΑΝΟΥΜΕ
ΟΤΙ ΜΠΟΡΟΥΜΕ ΓΙΑ ΝΑ ΚΡΑΤΗΣΟΥΜΕ ΕΝΗΜΕΡΩΜΕΝΕΣ ΤΙΣ ΑΓΓΕΛΙΕΣ ΜΑΣ!
Ώρες λειτουργίας:
ΔΕΥΤΕΡΑ ΕΩΣ ΠΑΡΑΣΚΕΥΗ ΑΠΟ ΤΙΣ 10:00 ΕΩΣ ΤΙΣ 18:00 ΚΑΙ ΣΑΒΒΑΤΟ ΑΠΟ ΤΙΣ 10:00 ΕΩΣ ΤΙΣ 14:00