Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.
Variable subsonic filter 15-150 Hz.
Continuously variable phase control 0-180 degrees.
Built-in protection circuits shut down the amplifier in the event of overloads.
High level input with automatic start.
Cooling fan in the bottom plate.
RMS output power @ 13,8 V
This is one of our most popular mono amplifiers with high reliabilty.
Number of channels: 1
Amplifier class: AB
Output power: in 4 ohm 220 W RMS
Output power: in 2 ohm 400 W RMS
Output power: in 1 ohm 500 W RMS
Mono bridge mode: 4 ohm N/A
Damping factor: > 100
S/N ratio, A-weighted: > 100 dB
Frequency range: 10 Hz 35 kHz
Low level output: No
Input sensitivity: 0,25 5 V
Input impedance: > 10 kohm
Input impedance, high level: 100 ohm
High pass filter: 15 150 Hz
Low pass filter: 50 500 Hz
Phase control for subwoofers: 0-180 degrees con. variable
High level input with auto start: Yes
Power consumption (idle): 0,8 A
Power consumption (max): 60 A
Rec. power cable Minimum 5AWG / 16 mm2
Fuses: 2 x 30 A
Dimension (W x D x H): 70 x 312 x 268 mm / 2,92 x 12,28 x 10,55"
Weight: 3,8 kg / 8,4 lb