1
/
2
Σύνδεσμος αγγελίας:
car.gr/55738464
Feuling Feuling, Race Series tappet set. STD travel. STD OD
412,50 €
Χαρακτηριστικά
Τίτλος
Feuling Feuling, Race Series tappet set. STD travel. STD OD
Κατάσταση
Καινούργιο
Τιμή
412,50 €
Κατηγορία
Ανταλλακτικά Μοτοσυκλετών - Αναβάτη - Άλλα
Εσωτερικός κωδικός καταστήματος
Car-707355
Feuling Feuling, Race Series tappet set. STD travel. STD OD
412,50 €
FeulingFeuling, Race Series tappet set. STD travel. STD OD 707355 fits 17-25 M8 Comes with standard .200" of travel. Feuling Race Series lifters for M8 engines have a relief machined into the lower body to clear the flange on the camshaft front exhaust lobe on grinds using smaller than stock base circles. These FEULING RACE SERIES lifters are full travel hydraulics, machined from a cold forged steel body and designed to exceed the needs of larger lift camshafts and higher valve spring pressures with a slower bleed down rate. RACE SERIES lifters maintain proper oil flow to the top end, increase engine RPM, valve-train stability, decreasing valve float promoting maximum valve lift. Due to the unstable nature of this 4 valve engine design with 1 rocker arm activating 2 valve springs Feuling highly recommends the use of these lifters for M8 engines running a higher lift cam and higher than stock valve spring seat pressures. This lifter will help reduce valve-train separation and can result in a quieter, better performing engine. Race Series lifters are compatible with FEULING OE+, HP+ or Race Series and factory oil pumps and are designed for use with both street and strip engines. Spin-Tron dyno developed and track proven, Made in the USA. • Precision ground needle roller bearing with high chromium steel axle for long life and minimal friction • Cold forged extra long piston, precision ground and fitted for controlled leak down and pump up • High flow disc style quick reacting check valve for better reaction at higher RPM. • Available in oversized diameters – Case Savers! • Recommended for both strip and performance street engines • Sold in sets of 4 • Made in the U.S.A. ¹ M8 engines must check clearance on front exhaust lifter to camshaft flange fit *FEULING RECOMMENDS PUMPING UP EACH LIFTER BY HAND DURING INSTALLATION, TO REMOVE ALL AIR AND PROVIDE A FULLY PUMPED UP LIFTER. USE OF A THIN WEIGHT OIL LIKE ATF IN A SQUIRT CAN WORKS WELL. See Feuling tool 588060 to check lifter bore diameters Δείτε περισσότερα στον κατάλογο Home > Parts > Engine > Lower End > Tappets > Feuling, Race Series tappet set. STD travel. STD OD
412,50 €
Αρ. αγγελίας:
Χαρακτηριστικά
Τίτλος
Feuling Feuling, Race Series tappet set. STD travel. STD OD
Τιμή
412,50 €
Κατάσταση
Καινούργιο
Εσωτερικός κωδικός καταστήματος
Car-707355
Τελευταία αλλαγή
2 μήνες πριν
Σύνδεσμος
Υπολογισμός δανείου
Χρηματοδότηση με
Από
Ποσό δανείου
412,5
€
Μηνιαία δόση
46.51 €
300 €
412 €
Η χρηματοδότηση παρέχεται από την
tbi bank
και όχι από τον
πωλητή της αγγελίας
.
Το τελικό επιτόκιο προσωποποιείται και μπορεί να διαφέρει.
Προσωπικό δάνειο έως 10,000 EUR για να κάνεις όποια αγορά θέλεις
Κατάθεση χρημάτων άμεσα στον Ελληνικό τραπεζικό σου λογαριασμό
Εύκολη και 100% online διαδικασία, χωρίς επίσκεψη σε φυσικό κατάστημα
Σταθερό επιτόκιο από 9.9%
Χωρίς εγγύηση και κρυφές χρεώσεις
Περιγραφή
FeulingFeuling, Race Series tappet set. STD travel. STD OD 707355 fits 17-25 M8 Comes with standard .200" of travel. Feuling Race Series lifters for M8 engines have a relief machined into the lower body to clear the flange on the camshaft front exhaust lobe on grinds using smaller than stock base circles. These FEULING RACE SERIES lifters are full travel hydraulics, machined from a cold forged steel body and designed to exceed the needs of larger lift camshafts and higher valve spring pressures with a slower bleed down rate. RACE SERIES lifters maintain proper oil flow to the top end, increase engine RPM, valve-train stability, decreasing valve float promoting maximum valve lift. Due to the unstable nature of this 4 valve engine design with 1 rocker arm activating 2 valve springs Feuling highly recommends the use of these lifters for M8 engines running a higher lift cam and higher than stock valve spring seat pressures. This lifter will help reduce valve-train separation and can result in a quieter, better performing engine. Race Series lifters are compatible with FEULING OE+, HP+ or Race Series and factory oil pumps and are designed for use with both street and strip engines. Spin-Tron dyno developed and track proven, Made in the USA. • Precision ground needle roller bearing with high chromium steel axle for long life and minimal friction • Cold forged extra long piston, precision ground and fitted for controlled leak down and pump up • High flow disc style quick reacting check valve for better reaction at higher RPM. • Available in oversized diameters – Case Savers! • Recommended for both strip and performance street engines • Sold in sets of 4 • Made in the U.S.A. ¹ M8 engines must check clearance on front exhaust lifter to camshaft flange fit *FEULING RECOMMENDS PUMPING UP EACH LIFTER BY HAND DURING INSTALLATION, TO REMOVE ALL AIR AND PROVIDE A FULLY PUMPED UP LIFTER. USE OF A THIN WEIGHT OIL LIKE ATF IN A SQUIRT CAN WORKS WELL. See Feuling tool 588060 to check lifter bore diameters Δείτε περισσότερα στον κατάλογο Home > Parts > Engine > Lower End > Tappets > Feuling, Race Series tappet set. STD travel. STD OD
Χώρος Διαφήμισης
Έμπορος
Έμπορος στο car.gr από 22-10-2010
