1
/
2
Σύνδεσμος αγγελίας:
car.gr/55731651
Kukko Kukko, separator with quick clamp spindle
188,01 €
Χαρακτηριστικά
Τίτλος
Kukko Kukko, separator with quick clamp spindle
Κατάσταση
Καινούργιο
Τιμή
188,01 €
Κατηγορία
Ανταλλακτικά Μοτοσυκλετών - Αναβάτη - Πολυεργαλεία
Εσωτερικός κωδικός καταστήματος
Car-951077
Kukko Kukko, separator with quick clamp spindle
188,01 €
KukkoKukko, separator with quick clamp spindle 951077 fits With quick clamp pressure spindle. Used with hand tools to pull ball bearings, roller bearings and inner races from a shaft where the bearing is installed tightly to another surface, so there is not enough room to use regular pulling jaws. When tightened, the bearing separator will pinch-in between the bearing and the surface making it possible to pull the bearing from the shaft. Note: Note: 951077 bearing separator will require the use of 951040 puller. Separator and puller are sold separately. - Build Series: 17 - Diameter of Shaft: 12-75mm - Side Screw Length: 75mm - Weight: 1.465kg - Space Below: 0mm - Space Next To It: 75mm - Spread: 12-75mm - Dept: 200mm - With quick-clamping pressure spindle - The sharp blades enable flush parts to be removed where pulling jaws cannot be used - The wedge-shaped separator jaws are secured underneath the component to be removed - The large supporting surfaces protect the parts to be pulled - For use with build series 18 puller - Easy to use, as the separator jaws are quickly and centrally tensioned with just one pressure spindle - Ultimate stability when removing, as the separator and pulling device are screwed firmly together Δείτε περισσότερα στον κατάλογο Workshop Home > Workshop > General Tools > Hand Tools > Pullers > Kukko, separator with quick clamp spindle
188,01 €
Αρ. αγγελίας:
Χαρακτηριστικά
Τίτλος
Kukko Kukko, separator with quick clamp spindle
Τιμή
188,01 €
Κατάσταση
Καινούργιο
Εσωτερικός κωδικός καταστήματος
Car-951077
Τελευταία αλλαγή
26 ημέρες πριν
Σύνδεσμος
Περιγραφή
KukkoKukko, separator with quick clamp spindle 951077 fits With quick clamp pressure spindle. Used with hand tools to pull ball bearings, roller bearings and inner races from a shaft where the bearing is installed tightly to another surface, so there is not enough room to use regular pulling jaws. When tightened, the bearing separator will pinch-in between the bearing and the surface making it possible to pull the bearing from the shaft. Note: Note: 951077 bearing separator will require the use of 951040 puller. Separator and puller are sold separately. - Build Series: 17 - Diameter of Shaft: 12-75mm - Side Screw Length: 75mm - Weight: 1.465kg - Space Below: 0mm - Space Next To It: 75mm - Spread: 12-75mm - Dept: 200mm - With quick-clamping pressure spindle - The sharp blades enable flush parts to be removed where pulling jaws cannot be used - The wedge-shaped separator jaws are secured underneath the component to be removed - The large supporting surfaces protect the parts to be pulled - For use with build series 18 puller - Easy to use, as the separator jaws are quickly and centrally tensioned with just one pressure spindle - Ultimate stability when removing, as the separator and pulling device are screwed firmly together Δείτε περισσότερα στον κατάλογο Workshop Home > Workshop > General Tools > Hand Tools > Pullers > Kukko, separator with quick clamp spindle
Χώρος Διαφήμισης
Έμπορος
Έμπορος στο car.gr από 22-10-2010
