1
/
2
- Αναζήτηση
- Ανταλλακτικά & Αξεσουάρ
- Μοτοσυκλετών - Αναβάτη
- Ζάντες - Λάστιχα
- Αξεσουάρ Λάστιχων-Ζαντών
- Αποστάτες
Σύνδεσμος αγγελίας:
car.gr/53940057
Rfx Pro Series Front Wheel Spacers - Black
21,40 €
Χαρακτηριστικά
Τίτλος
Rfx Pro Series Front Wheel Spacers - Black
Κατάσταση
Καινούργιο
Τιμή
21,40 €
Κατηγορία
Ανταλλακτικά Μοτοσυκλετών - Αναβάτη - Αποστάτες
Εσωτερικός κωδικός καταστήματος
Car-1110972002
Εργοστασιακός κωδικός
FXWS1020099BK
Μάρκα/μοντέλο οχήματος
Honda
CRF 150 R
2024 - 2026
Honda
CRF 150 R BIG WHEELS 16/19
2007 - 2023
Honda
CRF 150 R STD WHEELS 14/17
2007 - 2020
Διαθεσιμότητα:
Κατόπιν παραγγελίας / 1-5 Εργάσιμες ημέρες **ΚΑΘΥΣΤΕΡΗΣΗ ΛΟΓΩ ΔΙΑΚΟΠΩΝ/ΑΠΟΣΤΟΛΗ ΑΠΟ 27/8**
Κατασκευαστής:
RFX
Rfx Pro Series Front Wheel Spacers - Black
21,40 €
RFX Pro Series wheel spacers are lighter and more durable than OEM. Constructed from 7075-T6 aluminium and colour anodised to increase durability. This helps to reduce surface wear and lessens the amount of dirt entering the hub which in turn extends the life of the bearing. Designed with a rear lip to help keep them hooked into the seals, this reduces the chance of falling out during maintenance, speeding up wheel changes. RFX products are tested and used by many top Grand Prix and British Motocross teams. 7075-T6 Aluminium Construction. Colour anodised for durability. Machined rear location lip. CNC Machined For a tighter tolerance Fitting Instructions Start with the motorcycle on a box stand with the wheels raised from the ground. Remove the large spindle nut and loosen any pinch bolts on the lower fork leg. Remove the spindle from the wheel this may require the use of a brass punch and hammer if tight. Front wheel will now remove. The rear wheel should now be loose enough to push forward and lift the chain from the rear sprocket. Rear wheel will now remove. Remove the wheel spacers from the wheels. Clean in and around the seals with contact cleaner such as Maxima Electrical Contact and re-grease under the seal. Fit the new wheel spacers. Make sure to open the brake pads apart inside the brake callipers to give you extra room when re-fitting the wheel. Re-fit the wheels and push the spindles through. Re-fit the chain and set the proper chain tension by adjusting the axle blocks. Tightenthe large spindle nuts to the correct torque setting. With the bike of the stand pump the front forks up and down to align the front forks then tighten the pinch bolts. Finally pump the brakes to re- align the callipers.
21,40 €
Αρ. αγγελίας:
Χαρακτηριστικά
Τίτλος
Rfx Pro Series Front Wheel Spacers - Black
Τιμή
21,40 €
Κατάσταση
Καινούργιο
Εσωτερικός κωδικός καταστήματος
Car-1110972002
Εργοστασιακός κωδικός
FXWS1020099BK
Μάρκα/μοντέλο οχήματος
Honda
CRF 150 R
2024 - 2026
Honda
CRF 150 R BIG WHEELS 16/19
2007 - 2023
Honda
CRF 150 R STD WHEELS 14/17
2007 - 2020
Διαθεσιμότητα:
Κατόπιν παραγγελίας / 1-5 Εργάσιμες ημέρες **ΚΑΘΥΣΤΕΡΗΣΗ ΛΟΓΩ ΔΙΑΚΟΠΩΝ/ΑΠΟΣΤΟΛΗ ΑΠΟ 27/8**
Κατασκευαστής:
RFX
Τελευταία αλλαγή
4 μήνες πριν
Σύνδεσμος
Περιγραφή
RFX Pro Series wheel spacers are lighter and more durable than OEM. Constructed from 7075-T6 aluminium and colour anodised to increase durability. This helps to reduce surface wear and lessens the amount of dirt entering the hub which in turn extends the life of the bearing. Designed with a rear lip to help keep them hooked into the seals, this reduces the chance of falling out during maintenance, speeding up wheel changes. RFX products are tested and used by many top Grand Prix and British Motocross teams. 7075-T6 Aluminium Construction. Colour anodised for durability. Machined rear location lip. CNC Machined For a tighter tolerance Fitting Instructions Start with the motorcycle on a box stand with the wheels raised from the ground. Remove the large spindle nut and loosen any pinch bolts on the lower fork leg. Remove the spindle from the wheel this may require the use of a brass punch and hammer if tight. Front wheel will now remove. The rear wheel should now be loose enough to push forward and lift the chain from the rear sprocket. Rear wheel will now remove. Remove the wheel spacers from the wheels. Clean in and around the seals with contact cleaner such as Maxima Electrical Contact and re-grease under the seal. Fit the new wheel spacers. Make sure to open the brake pads apart inside the brake callipers to give you extra room when re-fitting the wheel. Re-fit the wheels and push the spindles through. Re-fit the chain and set the proper chain tension by adjusting the axle blocks. Tightenthe large spindle nuts to the correct torque setting. With the bike of the stand pump the front forks up and down to align the front forks then tighten the pinch bolts. Finally pump the brakes to re- align the callipers.
Χώρος Διαφήμισης
Έμπορος
Motofix.gr
Υπερκατάστημα Aftermarket ανταλλακτικών για Μοτοσυκλέτες (Motocross & Street & ), Scooter, ATV, Jet-Ski και Snowmobiles
-Πάνω απο 120,000 μοναδικοί κωδικοί σε περιμένουν online
-Δωρεάν μεταφορικά άνω των 100€
-Τεχνική υποστήριξη
-Ασύγκριτη εξυπηρέτηση πελατών
-Λιανικές και Χονδρικές πωλήσεις
ΑΝΑΝΕΩΜΕΝΟ & ΕΝΗΜΕΡΩΜΕΝΟ E-SHOP
Βρες χιλιάδες ανταλλακτικά στο e-shop μας: https://www.motofix.gr/
ΚΑΛΕΣΕ ΜΑΣ για οποιαδήποτε ερώτηση στο 2314 071055 !
Δευτέρα - Παρασκευή: 09:00 - 18:00
Ελπίδος 96, Πολίχνη, 56533, Θεσσαλονίκη
Ώρες λειτουργίας:
Δευτέρα-Παρασκευή 09:00-18:00