1
/
1
Σύνδεσμος αγγελίας:
car.gr/53773962
PEAK AND HOLD 8A/2A INJECTOR DRIVER w/o Harness
283,96 €
Χαρακτηριστικά
Τίτλος
PEAK AND HOLD 8A/2A INJECTOR DRIVER w/o Harness
Κατάσταση
Καινούργιο
Τιμή
283,96 €
Κατηγορία
Ανταλλακτικά Αυτοκινήτων - Εγκέφαλος + Κίτ
Εσωτερικός κωδικός καταστήματος
Car-56758
Εργοστασιακός κωδικός
3325
Κατασκευαστής ανταλακτικού
FUELTECH - 3325 PEAK AND HOLD 8A/2A INJECTOR DRIVER w/o Harness
283,96 €
FuelTech’s Peak and amp; Hold 8A/2A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injectors with impedance below 1.5 ohm. Designed for use with low impedance fuel injectors. Mounting kit included.Technical Description.Controls up to 4 injectors with impedance below 1.5 ohm.4 FT Injectors (1 per channel).16 Bosch 160lb/h (1600cc) injectors (4 per channel).8 Siemens low impedance injectors (2 per channel).4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector).To determine which Peak and amp; Hold you need.Grab a multi-meter and select Ohms 200.Touch the positive and negative leads of multi-meter together to measure resistance (record this number.i.e. measured 0.3).Then take the positive and negative leads from multi-meter and put on each terminal of the injector. Doesn't matter the order. Record this measurement.Take the ohms measurement from Step 3 and then subtract the number you got in Step 2 (i.e. Step 3 4.8ohms - Step 2 0.3ohms = Total 4.5ohms).High Impedance Injectors - Above 7ohms - No Peak and Hold Boxes are needed.Peak and Hold 2A - 3ohms to 7ohms (Bosch 160lb/hr).Peak and Hold 4A - Below 3ohms to 1.5ohms.Peak and Hold 8A - Below 1.5ohms (FT Injector, Billet Atomizer*).All low impedance Billet Atomizer Injectors manufactured after Nov. 2012 require 8A regardless of measured resistance.*Billet Atomizer Injectors - Anything prior to serial # C300**** should only use the 4A/1A. This only applies to injectors manufactured prior to Nov. 2012.Contents of Packaging.1 Peak and Hold 8A/2A.1 Operation and installation guide.1 mounting kit (4 rubber mounts, 4 washers and 4 ¼” nuts).6ft Peak and Hold unterminated harness (optional).1 FuelTech black carbon fiber sticker
283,96 €
Αρ. αγγελίας:
Χαρακτηριστικά
Τίτλος
PEAK AND HOLD 8A/2A INJECTOR DRIVER w/o Harness
Τιμή
283,96 €
Κατάσταση
Καινούργιο
Εσωτερικός κωδικός καταστήματος
Car-56758
Εργοστασιακός κωδικός
3325
Κατασκευαστής ανταλακτικού
FUELTECH - 3325
Τελευταία αλλαγή
4 μήνες πριν
Σύνδεσμος
Περιγραφή
FuelTech’s Peak and amp; Hold 8A/2A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injectors with impedance below 1.5 ohm. Designed for use with low impedance fuel injectors. Mounting kit included.Technical Description.Controls up to 4 injectors with impedance below 1.5 ohm.4 FT Injectors (1 per channel).16 Bosch 160lb/h (1600cc) injectors (4 per channel).8 Siemens low impedance injectors (2 per channel).4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector).To determine which Peak and amp; Hold you need.Grab a multi-meter and select Ohms 200.Touch the positive and negative leads of multi-meter together to measure resistance (record this number.i.e. measured 0.3).Then take the positive and negative leads from multi-meter and put on each terminal of the injector. Doesn't matter the order. Record this measurement.Take the ohms measurement from Step 3 and then subtract the number you got in Step 2 (i.e. Step 3 4.8ohms - Step 2 0.3ohms = Total 4.5ohms).High Impedance Injectors - Above 7ohms - No Peak and Hold Boxes are needed.Peak and Hold 2A - 3ohms to 7ohms (Bosch 160lb/hr).Peak and Hold 4A - Below 3ohms to 1.5ohms.Peak and Hold 8A - Below 1.5ohms (FT Injector, Billet Atomizer*).All low impedance Billet Atomizer Injectors manufactured after Nov. 2012 require 8A regardless of measured resistance.*Billet Atomizer Injectors - Anything prior to serial # C300**** should only use the 4A/1A. This only applies to injectors manufactured prior to Nov. 2012.Contents of Packaging.1 Peak and Hold 8A/2A.1 Operation and installation guide.1 mounting kit (4 rubber mounts, 4 washers and 4 ¼” nuts).6ft Peak and Hold unterminated harness (optional).1 FuelTech black carbon fiber sticker
Χώρος Διαφήμισης
Έμπορος
Έμπορος στο car.gr από 22-02-2011
ΣΤΙΣ ΤΙΜΕΣ ΔΕΝ ΣΥΜΠΕΡΙΛΑΜΒΑΝΕΤΑΙ Ο ΦΠΑ..............
Οι εικονες δεν αντιπροσωπευουν παντα το αναγραφομενο προϊον.
Οι τιμες λογω συναλλαγματος μπορει να αλλαξουν χωρις προειδοποιηση.......
ΟΙ ΤΙΜΕΣ ΔΕΝ ΕΙΝΑΙ ΑΝΤΙΠΡΟΣΩΠΕΥΤΙΚΕΣ......
Παρακαλω ζητατε να ενημερωνεστε για την εγγυηση και τη διαθεσιμοτητα του προϊοντος.
Επισημοι αντιπροσωποι των:
ECS tuning, Hawk, Aeromotive, Tial, Turbosmart, K-sport, D.E.I., Fuel Injector Clinic(FIC), Hoosier, SpeedHut Gauges, Supertech, HSD, KAAZ, Driftworks, Autotech, Bosch, Siemens Deka, CTS turbo, Titan Motorsports, Prosport Gauges, Aeroflow, XtremeClutch, DBA, Whiteline, Cobra, Mishimoto,.
Ώρες λειτουργίας:
ΛΟΓΩ ΤΗΛΕΦΩΝΙΚΗΣ ΒΛΑΒΗΣ ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΑ ΚΙΝΗΤΑ
Δευτερα - Παρασκευη 10,00 - 18.00
Σαββατο 10.00 - 14.00