1
/
2
Σύνδεσμος αγγελίας:
car.gr/339639578
S, 48-64 crankcase assembly, STD bore. Natural
2,67 €
Χαρακτηριστικά
Τίτλος
S, 48-64 crankcase assembly, STD bore. Natural
Κατάσταση
Καινούργιο
Τιμή
2,67 €
Κατηγορία
Ανταλλακτικά Μοτοσυκλετών - Αναβάτη - Άλλα
Εσωτερικός κωδικός καταστήματος
Car-1169054
Εργοστασιακός κωδικός
512348
Κατασκευαστής ανταλακτικού
S&S 
S, 48-64 crankcase assembly, STD bore. Natural
2,67 €
For use with a \'tin\' (metal) primary housing. S Superstock™ crankcases, made from 356-T6 aluminum, are much stronger than the OEM case. OEM cases can/may break in high performance or even stock applications, like more than a few of us found out the hard way. These S Superstock™ cases can be used for both stock replacement and racing applications. Important to the engine builder are the substantial savings in labor when using S cases. These cases come \'set up\' with sprocket shaft Timken main bearing races and cam needle bearings installed and pinion shaft main bearing race pressed in and line-honed. Additional parts that are supplied include Timken sprocket shaft bearings, cylinder studs, nickel plated case bolts, crankcase fittings, oil pressure sensor, timing & magnetic crankcase drain plugs and a special S design alternator stator plug clamp screw. The flywheel scrapers are machined to match the original 8-1/2\" diameter flywheels. S cases maximize crankcase oil scavenging efficiency by using a \'ported\' design breather passageway. S cases are clearanced up to and including 5\", no additional clearancing for strokers will be necessary. S cases come complete with assembly instructions. Note: S crankcases for 36-54 Knuckle and Panhead models will not take OEM flywheels, pinion or sprocket shaft since late style (1955-up) Timken bearings are used in all S cases. 55-up shafts will not fit 36-54 OEM flywheels, S does not recommend machining 36-54 flywheels to take 55-up shafts. For all 36-55 B.T. applications 58-81 (MCS 512404) pinion & 55-64 (MCS 512401) splined sprocket shafts can be used with S flywheels, which all have a 6° shaft taper with keyway. Note: The 36-72 S oil pump (MCS 519922) can be used with all 36-69 S crankcases. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required.
2,67 €
Αρ. αγγελίας:
Χαρακτηριστικά
Τίτλος
S, 48-64 crankcase assembly, STD bore. Natural
Τιμή
2,67 €
Κατάσταση
Καινούργιο
Εσωτερικός κωδικός καταστήματος
Car-1169054
Εργοστασιακός κωδικός
512348
Κατασκευαστής ανταλακτικού
S&S
Τελευταία αλλαγή
25 ημέρες πριν
Σύνδεσμος
Περιγραφή
For use with a \'tin\' (metal) primary housing. S Superstock™ crankcases, made from 356-T6 aluminum, are much stronger than the OEM case. OEM cases can/may break in high performance or even stock applications, like more than a few of us found out the hard way. These S Superstock™ cases can be used for both stock replacement and racing applications. Important to the engine builder are the substantial savings in labor when using S cases. These cases come \'set up\' with sprocket shaft Timken main bearing races and cam needle bearings installed and pinion shaft main bearing race pressed in and line-honed. Additional parts that are supplied include Timken sprocket shaft bearings, cylinder studs, nickel plated case bolts, crankcase fittings, oil pressure sensor, timing & magnetic crankcase drain plugs and a special S design alternator stator plug clamp screw. The flywheel scrapers are machined to match the original 8-1/2\" diameter flywheels. S cases maximize crankcase oil scavenging efficiency by using a \'ported\' design breather passageway. S cases are clearanced up to and including 5\", no additional clearancing for strokers will be necessary. S cases come complete with assembly instructions. Note: S crankcases for 36-54 Knuckle and Panhead models will not take OEM flywheels, pinion or sprocket shaft since late style (1955-up) Timken bearings are used in all S cases. 55-up shafts will not fit 36-54 OEM flywheels, S does not recommend machining 36-54 flywheels to take 55-up shafts. For all 36-55 B.T. applications 58-81 (MCS 512404) pinion & 55-64 (MCS 512401) splined sprocket shafts can be used with S flywheels, which all have a 6° shaft taper with keyway. Note: The 36-72 S oil pump (MCS 519922) can be used with all 36-69 S crankcases. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required.
Χώρος Διαφήμισης
Έμπορος
IRON HORSES ΑΝΤΑΛΛΑΚΤΙΚΑ ΑΞΕΣΟΥΑΡ SERVICE HARLEY DAVIDSON
ΚΑΘΗΜΕΡΙΝΑ ΑΝΤΑΛΛΑΚΤΙΚΑ ΑΝΤΙΚΑΤΑΒΟΛΗ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ ΑΥΘΗΜΕΡΟΝ.
ΠΡΟΣΟΧΗ! ΟΙ ΤΙΜΕΣ ΜΠΟΡΟΥΝ ΝΑ ΜΕΤΑΒΛΗΘΟΥΝ ΧΩΡΙΣ ΕΝΗΜΕΡΩΣΗ ΚΑΝΟΥΜΕ
ΟΤΙ ΜΠΟΡΟΥΜΕ ΓΙΑ ΝΑ ΚΡΑΤΗΣΟΥΜΕ ΕΝΗΜΕΡΩΜΕΝΕΣ ΤΙΣ ΑΓΓΕΛΙΕΣ ΜΑΣ!
Ώρες λειτουργίας:
ΔΕΥΤΕΡΑ ΕΩΣ ΠΑΡΑΣΚΕΥΗ ΑΠΟ ΤΙΣ 10:00 ΕΩΣ ΤΙΣ 18:00 ΚΑΙ ΣΑΒΒΑΤΟ ΑΠΟ ΤΙΣ 10:00 ΕΩΣ ΤΙΣ 14:00