HIGHSIDER Classic push button, suitable for 7/8" and 1" handlebars. CNC milled switch with two buttons. Can be used universally to control load relays, switch various modes on speedometers, etc. Connections: Button A : green and red (from below). Button B : green and brown Green is input signal Dimensions: Button Ø: 4.5 mm Rubber: 75 mm x 0.3 mm Allen screws: M3x 5 mm Cable length 570 mm Scope of delivery: 1x push button 1x rubber 2x screws Note: NOT FOR CURRENTS over 0.05 amps. So at 12 volts max. 0.6 watts.
HIGHSIDER Classic push button, suitable for 7/8" and 1" handlebars. CNC milled switch with two buttons. Can be used universally to control load relays, switch various modes on speedometers, etc. Connections: Button A : green and red (from below). Button B : green and brown Green is input signal Dimensions: Button Ø: 4.5 mm Rubber: 75 mm x 0.3 mm Allen screws: M3x 5 mm Cable length 570 mm Scope of delivery: 1x push button 1x rubber 2x screws Note: NOT FOR CURRENTS over 0.05 amps. So at 12 volts max. 0.6 watts.