Καθαρισμός
Επιλεγμένα Κριτήρια
Εργοστασιακός κωδικός
Κλείσιμο
Κατάσταση
Άνοιγμα
Ιδιώτης/Έμπορος
Κλείσιμο
Κατηγορία
Κλείσιμο
Μάρκα
  • Δεν υπάρχει η μάρκα που ψάχνεις; άλλαξε την αναζήτηση σου επιλέγοντας διαφορετικά κριτήρια.
Κλείσιμο
Μοντέλο
  • Δεν υπάρχει το μοντέλο που ψάχνεις; άλλαξε την αναζήτηση σου επιλέγοντας διαφορετικά κριτήρια.
Κλείσιμο
Χρονολογία
Κλείσιμο
Περιοχή

Κλείσιμο
Τιμή

Άνοιγμα
Ετικέτες
  • Δεν υπάρχει η ετικέτα που ψάχνεις; άλλαξε την αναζήτηση σου επιλέγοντας διαφορετικά κριτήρια.
Άνοιγμα
Ηλικία Αγγελίας
Κλείσιμο
Τύπος αγγελίας

 

Fueltech FT600 digital dash display 4,3" + ECU (άγραφος εγκέφαλος)

Fueltech FT600 digital dash display 4,3" + ECU (άγραφος εγκέφαλος) Fueltech FT600 digital dash display 4,3" + E...

3.500 €

Αυτοκινήτων » Ηλεκτρικά - Ηλεκρονικά » Εγκέφαλος + Κίτ
Προδιαγραφές: • Otto cycle engine control for 1, 2, 3, 4, 5, 6, 8, 10 and 12 cylinders • Wankel engine control (rotary) for 2, 3 and 4 rotors • Full sequential ignition control, semi-sequential and multipoint control • Ignition control through trigger wheel or distributor • Full sequential ignition or wasted spark • Closed loop injection through oxygen sensor (wide band lambda sensor) • AMP SUPERSEAL automotive connectors • Electronic throttle body Control (Drive-By-Wire) • Ignition timing and actuator based Idle control (throttle body, step motor, or PWM valve) • Real-time adjustable maps on the screen and on the FTManager software • Aluminium case with IP67 certified waterproof seals (capable to withstand up to 1 hour under 1.65 feets of water) Είσοδοι: • Differential input for RPM signal • Differential input for cam sync signal • 20 input channels which are completely adjustable – digital and analogic (temperature, pressure, speed and position sensors, TPS, external MAP, buttons, keys, etc.) • 2 inputs with a high gain preamplifier usually used with a strain gage sensor • Adjustable sensor reading scale • Speed sensor and integrated gyroscope • Internal MAP sensor of 7 bar (1 bar vacuum and 6 bar positive pressure); • 1 USB port for computer and FuelTech software connection • 2 CAN ports for FuelTech FTCAN 2.0 or FTCAN 1.0 (communication with FuelTech WB-O2 Nano, FuelTech EGT-8 CAN, Racepak IQ3 (requires Racepak Universal Interface Module), FuelTech FTSPARK, VNET, AiM, etc) • OEM CAN partial compatibility with: C6 Corvette, C7 Corvette, 5th gen Camaro, 2009 CTS-V Cadillac Έξοδοι: • 32 general-purpose outputs: (all of which can be used for general accessories as fuel pump, thermatic fans, valves, injectors, solenoids, etc.) • 16 open collector outputs: recommended for high impedance injectors (up to 4 injectors per output) – it is possible to set up to 32 injectors using external FuelTech Peak and Hold ECU • 8 open collector outputs with a 5V current source of: recommended for ignition control • 8 PUSH-PULL or HALF BRIDGE outputs: suitable for ignition, step motor control, electronic throttle body and to activate loads by 12V instead of ground Οθόνη: • Screen dashboard which displays different sizes and styles to be used with any existing equipment or sensor • Dashboard can have up to 4 screens with navigation through the screen or external button • Upper tab with 10 LED lights, colored RGB and adjustable progressive shift light • 4 RGB LED side lights which can be triggered by 3 different combined settings • Diagnosis dashboard with real-time information of all inputs, outputs, CAN engine start diagnosis and Status Events Ρυθμίσεις ψεκασμού: • Full sequential injection for up to 24 outputs • Closed loop fuel control through O2 sensor (wide band sensor) (An external wide band lambda sensor conditioner is required – FuelTech WB-O2 Nano, Alcohol-O2, WBO2 Datalogger, etc.) • 2 injection banks (Bank A and bank B) • Primary map though MAP, TPS or RPM • Advanced 3D primary map with up to 32x32 cells (completely adjustable map index and size) • Simplified 2D map with up to 1x32 cells by MAP or TPS and RPM compensation of up to 1x32 cells (completely adjustable map index and size) • Injection time resolution of 0,001ms • Acceleration fuel enrichment and decay adjustment • Individual cylinder trim setting by MAP or RPM • Injector compensation through: - Engine temperature - Air temperature - Battery voltage (individual per bank) - TPS or MAP • Starting engine map with the engine temperature • Prime pulse • Post start • Gear based fuel compensation • Gear shift fuel compensation • Fuel injection angle • Injectors deadtime compensation by battery voltage Ρυθμίσεις ανάφλεξης: • Sequential ignition for up to 12 cylinders • Main map by MAP, TPS or RPM • Advanced 3D primary map with up to 32x32 cells (completely adjustable map index and size) • Simplified 2D map with up to 1x32 cells per MAP or TPS and RPM compensation of up to 1x32 cells (completely adjustable map index and size) • Injection angle resolution of 0,01° • Individual cylinder injection settings • Ignition timing compensation by air temperature • Ignition timing compensation by engine temperature • Gear based timing compensation • Gear shift timing compensation Internal Datalogger: • Multiple session recording (files) logs up to 256 channels • Simplified mode with sample rate of 25, 50, 100 or 200Hz • Advanced mode allows individual settings for the sample rate with 1, 5, 25, 50, 100 or 200Hz • Automatic activation by RPM, through the screen or by external button • Data storage for up to 2h50min (24 channels at 25Hz) • FTManager Datalogger Software for viewing and comparing logs Drag racing χαρακτηριστικά: • Burnout mode, 2-step, 3-step • Ignition timing map for drag Racing features • Line lock brake output • Brake pressure control by line lock • 2-step activation by speed, boost, MAP or clutch position • Time based RPM limiter by timing retard or ignition cut • Time based wheel speed or driveshaft RPM control with timing retard or ignition cut • Time-based ignition timing compensation • Time-based fuel compensation • Pro-Nitrous setting for up to 6 stages, with activation control, fuel enrichment and ignition timing maps • Gear shift output • Time based output • Staging control • Wheelie Control Χαρακτηριστικά αυτοκινήτων δρόμου: • Total and trip hour meter • Total and trip odometer • High and low beam • Right and left turn signals • Pit Limit / Speed Limit • START/STOP button Δευτερεύουσες λειτουργίες: • Integrated GearController : ignition cut for clutchless gear shiftings using a strain gage sensor on the shifter • Integrated BoostController: wastegate valve pressure control • Idle speed control by timing, step motor, PWM valve or electronic throttle body • Deceleration fuel cutoff • Control of up to two thermatic fans through engine temperature or air conditioning, one of the outputs can drive a solid state using PWM control for soft starting the fans • Air conditioning control • Fuel pump control – with 6s prime • Variable Valve Timing (VTEC) control • Progressive nitrous control with fuel enrichment and timing retard; • Generic duty cycle – PWM control • Boost activated output • RPM activated output • Different options for gear detection: RPM drop, analogic sensor, pulse, speed and gear ratio, by gear shift output or GearController • Start button. Allows to start and shut down the engine via a relay connected to an output switching the starter • Cold start with external reservoir • Differential control for Yamaha YXZ1000 UTV • Active traction control keeps wheel slip on ideal levels for maximum traction, thus adapting the available traction conditions as it seeks to maintain the programmed wheel speed difference by reading traction wheel and reference wheel speed difference. • Hi-resolution engine power control method for RPM limiter. Controls timing on each cylinder and considerably reduces the turbo spool time in a transbrake/2-step rev limiter, keeps cylinders and spark plugs in conditions of maximum efficiency (they never get wet because they always fire), allow to lower the RPM limiter for launch or to make more boost at the same RPM and smoothens the 2-step limiter operation for less vibration. (Patent pending) • Pit Limit / Speed Limit • Generic outputs allow to configure up to 8 outputs by associating an input and setting up the way the output will be activated Προκαθορισμένοι αισθητήρες: • Default sensors make the configuration easier: -Oil pressure -Fuel pressure -External MAP sensor (GM 1 bar, GM 1.05 bar, GM 2 bar, GM 3 bar, GM 3.05 bar) -Nitrous bottle pressure -Clutch pressure -Wastegate pressure -Brake pressure -Back pressure -Pan Vacuum -Transmission pressure -Torque converter pressure -Engine coolant pressure -Air temperature -Engine temperature -Exhaust gas temperature (EGT) -Transmission temperature -Intercooler temperature -Tire temperature -Track temperature -Clutch position -Shock position -Wheel speed -Driveshaft RPM -Input shaft RPM -Ride height sensor -Pitch rate sensor -Flex Fuel sensor Προστασία και ειδοποιήσεις: • RPM limiter by fuel or ignition cut • Shift light with sound and dashboard alert and/or external shift light • Configurable safe mode options (RPM limit or engine shutoff): - High or low exhaust gas temperature (EGT), O2 closed loop limit, over boost, over rev, engine temperature, duty cycle, oil pressure, fuel pressure and differential fuel pressure Λογισμικό: • FTManager has several tools and features: • Real-time map edition • Edition of the indexes of map tables • Save and read saved maps on the PC • Open maps from log files • Display fuel maps in ms, %VE, %DC and lb/h • Easy edition of time-based controls, organizing all in one screen and making it possible to use a log file as reference • ProNitrous edition aided by the stage chart • Allows converting maps of previous ECUs (FT200, FT250, FT300, FT350 and FT400) • Allows importing of some specific tables from other maps • ECU software upgrades • Splash screen customization • Engine operation in real time analysis through gauges and graphics with full screen option • Check alert and status messages • Test time-based features • Edit channels of the internal datalogger and their individual logging rates • Switch between basic (2D) or advanced (3D) maps • Edit the odometer and hourmeter • Reset the ECU to factory default • Recalibrate the touchscreen • View all devices connected to the CAN network • Receive warnings about new updates • Internet Remote Tuning allows connecting to another FTManager over the internet, for giving or receiving remote support • FTDatalogger • Download and analyze log files from PowerFT ECUs • Log files comparison • Mathematical channels • Data export to CSV file • Overlay functions easily show which cell the engine was running on for better data analysis: - Fuel tables overlay - Ignition tables overlay - Closed loop corrections: analyses all closed-loop compensations and suggests a correction for the fuel map • Select between light or dark background for better data visualization • Select if you want to show channels names and values on the chart or only in the preview panel • Full timeline visualization • Set log zero time (tell the log time where the car launched) • Erase your ECU datalogger memory • Trim feature for log files – make then smaller and have only the information you need • FuelTech Datalog App: - Open your log files on your phone`s screen (up to 4 channels at the same time) - (Android and iOS) Γενικές λειτουργίες: • Display brightness adjustment • LED lights brightness adjustment • Night and day mode selection by external switch and through the menu • Buzzer intensity adjustment for the interface and sound alerts • Memory for saving up to 5 different maps • ECU and Map protection password, with individual full ECU or map password only, including map lock-up function that allows the current map to be saved and run exclusively on the actual ECU (ensure by serial code). Maintenance password protects the edition of the total hour meter and total odometer. • User and tuner protection password • PC communication through mini USB cable • Operation temperature: from -4 F to +158 F • Maximum power supply voltage: 20v
ΧΑΙΔΑΡΙ 12461, Τηλ.  Τελευταία Αλλαγή: 2 ώρες
MeisterR ClubRace ρυθμιζόμενη ανάρτηση για Honda S2000 (AP1, AP2)

MeisterR ClubRace ρυθμιζόμενη ανάρτηση για Honda S2000 (AP1, AP2) MeisterR ClubRace ρυθμιζόμενη ανάρτηση για H...

1.130 €

Αυτοκινήτων » Ανάρτηση & Τιμόνι » Ανάρτηση Ρυθμιζόμενη
MeisterR ClubRace, ρυθμιζόμενη ανάρτηση καθ' ύψος και σκληρότητα. Σκληρότητα ελατηρίων εμπρός: 12,5 Kgf/mm Σκληρότητα ελατηρίων πίσω: 10 Kgf/mm -Η τεχνολογία CRD(Close Ratio Damping) της MeisterR κρατάει την αναλογία επαναφοράς(rebound) και βύθισης(compression) στο ίδιο επίπεδο μεταξύ τους επιτυγχάνοντας έτσι καλύτερη λειτουργία του αμορτισέρ με αποτέλεσμα την πολύ καλύτερη συμπεριφορά του αυτοκινήτου στην πίστα. -Ρύθμιση σκληρότητας σε 32 σκάλες. -Αμορτισέρ με mono-tube σχεδίαση. -Ρυθμιζόμενο ύψος από το γόνατο του αμορτισέρ εμπρός-πίσω(ανάλογα το αυτοκίνητο). -Παρέχεται με ρυθμιζόμενο pillow ball top mount αλουμινίου ή top mount αλουμινίου με ενισχυμένο ελαστικό σύνδεσμο(ανάλογα το αυτοκίνητο). -Ειδική βαφή κατά της σκουριάς. -Κατάλληλη για συχνή χρήση εντός πίστας αλλά και δρόμου. -Μειώνει τις κλίσεις του αμαξώματος, έχοντας υποδειγματικό κράτημα εντός πίστας. -Οι ρυθμίσεις της δίνουν την δυνατότητα για τo ακριβές σετάρισμα της στο οδηγικό στυλ του οδηγού. -Σχεδιασμένη, κατασκευασμένη και ελεγμένη στην Αγγλία.
ΧΑΙΔΑΡΙ 12461, Τηλ.  Τελευταία Αλλαγή: 2 ώρες
Fueltech FT550 digital dash display 4,3" + ECU (άγραφος εγκέφαλος)

Fueltech FT550 digital dash display 4,3" + ECU (άγραφος εγκέφαλος) Fueltech FT550 digital dash display 4,3" + E...

2.400 €

Αυτοκινήτων » Ηλεκτρικά - Ηλεκρονικά » Εγκέφαλος + Κίτ
Προδιαγραφές: • Otto cycle engine control for 1, 2, 3, 4, 5, 6, 8, 10 and 12 cylinders • Wankel engine control (rotary) for 2, 3 and 4 rotors • Full sequential ignition control, semi-sequential and multipoint control • Ignition control through trigger wheel or distributor • Full sequential ignition or wasted spark • Closed loop injection through oxygen sensor (wide band lambda sensor)1 • AMP SUPERSEAL automotive connectors • Electronic throttle body Control (Drive-By-Wire) • Ignition timing and actuator based Idle control (electronic throttle body, step motor, or PWM valve) • Real-time adjustable maps on the screen and on the FTManager software (including internet remote tuning) • Waterproof sealed case made from polished ABS Είσοδοι: • Differential input for RPM signal • Differential input for cam sync signal (including multi-teeth cam sync triggers) • 14 input channels fully customizable – digital and analog (temperature, pressure, speed and position sensors, TPS, external MAP, buttons, keys, etc.) - 2 inputs with a high gain preamplifier usually used with a strain gage sensor - Adjustable sensor reading scale • Built-in accelerometer and gyroscope • Internal MAP sensor of 7 bar (1 bar vacuum and 6 bar positive pressure) • 1 USB port for computer and FuelTech software connection • 2 CAN ports for FuelTech FTCAN 2.0 or FTCAN 1.0 - FuelTech equipment: WB-O2 Nano, EGT-8 CAN, FTSPARK and SwitchPanel-8 - Third party equipment: Racepak IQ3, VNET, AiM, etc) - OEM CAN partial compatibility with: C6 Corvette, C7 Corvette, 5th gen Camaro, 2009 CTS-V Cadillac Έξοδοι: • Total of 24 general-purpose outputs: (all of which can be used for general accessories as fuel pump, thermatic fans, valves or injectors for BoostController, solenoids, etc.) - 12 open collector outputs: recommended for high impedance injectors (up to 4 injectors per output) – it is possible to set up to 24 outputs using external FuelTech Peak and Hold driver - 8 open collector outputs with a 5V current source: recommended for ignition control - 8 PUSH-PULL or HALF BRIDGE outputs: suitable for ignition, step motor control, electronic throttle body and to activate loads by 12V instead of ground Οθόνη: • Screen dashboard which displays different sizes and styles to be used with any existing equipment or sensor • Dashboard can have up to 4 screens with navigation through the screen or an external button • Virtual LEDs with combined activations for up to 3 conditions • Diagnostic panel with real-time information of all inputs, outputs, CAN, Status Events and engine diagnostics • Customizable splash screen allows the user to select the image shown on the FT550 start up screen Ρυθμίσεις ψεκασμού: • Full sequential injection for up to 20 outputs • Closed loop fuel control through O2 sensor (wide band sensor) (An external wide band lambda sensor conditioner is required – FuelTech WB-O2 Nano, Alcohol-O2, WBO2 Datalogger, etc.) • 2 injection banks (Bank A and bank B) • Primary map though MAP, TPS or RPM • Advanced 3D primary map with up to 32x32 cells (completely adjustable map index and size) • Simplified 2D map with up to 1x32 cells by MAP or TPS and RPM compensation of up to 1x32 cells (completely adjustable map index and size) • Injection time resolution of 0,001ms • Acceleration fuel enrichment and decay adjustment • Individual cylinder trim setting by MAP or RPM • Injector compensation through: - Engine temperature - Air temperature - Battery tension (individual per bank) - TPS or MAP • Starting engine map with the engine temperature • Prime pulse table • Post start enrichment • Gear based fuel compensation • Gear shift fuel compensation • Fuel injection angle table • Injectors deadtime compensation by battery voltage Ρυθμίσεις ανάφλεξης: • Sequential ignition for up to 12 cylinders • Main map by MAP, TPS or RPM • Advanced 3D primary map with up to 32x32 cells (completely adjustable map index and size) • Simplified 2D map with up to 1x32 cells per MAP or TPS and RPM compensation of up to 1x32 cells (completely adjustable map index and size) • Injection angle resolution of 0,01° • Individual cylinder injection settings • Ignition timing compensation by air temperature • Ignition timing compensation by engine temperature • Gear based timing compensation • Gear shift timing compensation Internal Datalogger: • Multiple session recording (files) logs up to 256 channels • Simplified mode with sample rate of 25, 50, 100 or 200Hz • Advanced mode allows individual settings for the sample rate with 1, 5, 25, 50, 100 or 200Hz • Automatic activation by RPM, through the screen or by external button • Data storage for up to 2h50min (24 channels at 25Hz) • FTManager Datalogger Software for viewing and comparing logs Drag racing χαρακτηριστικά: • Burnout mode, 2-step, 3-step (including Roll Start) • 2-step activation by speed, boost, MAP or clutch position • Line lock brake output • Brake pressure control by line lock • Ignition timing map for drag Racing features • Time based RPM limiter by timing retard or ignition cut • Time based wheel speed or driveshaft RPM control with timing retard or ignition cut • Time-based ignition timing compensation • Time-based fuel compensation • Pro-Nitrous setting for up to 6 stages, with activation control, fuel enrichment and ignition timing maps • Gear shift output • Time based output • Staging control • Wheelie Control • Time based max throttle position Χαρακτηριστικά αυτοκινήτων δρόμου: • Total and trip hour meter • Total and trip odometer • High and low beam • Right and left turn signals • Pit Limit / Speed Limit • START/STOP button Δευτερεύουσες λειτουργίες: • Integrated GearController: ignition cut for clutchless gear shiftings using a strain gage sensor on the shifter • Integrated BoostController: wastegate valve pressure control • Idle speed control by timing, step motor, PWM valve or electronic throttle body • Deceleration fuel cutoff • Control of up to two thermatic fans activated by engine temperature and by the A/C, one of the outputs can drive a solid state using PWM control for soft starting the fans • Air conditioning control • Fuel pump control – with 6s prime • Variable Valve Timing (VTEC) control • Progressive nitrous control with fuel enrichment and timing retard • Generic duty cycle – PWM control • Boost activated output • RPM activated output • Different options for gear detection: RPM drop, analogic sensor, pulse, speed and gear ratio, by gear shift output or GearController • Start button. Allows to start and shut down the engine via a relay connected to an output switching the starter • Cold start with external reservoir • Differential control for Yamaha YXZ1000 UTV • Active traction control keeps wheel slip on ideal levels for maximum traction, thus adapting the available traction conditions as it seeks to maintain the programmed wheel speed difference by reading traction wheel and reference wheel speed difference • Hi-resolution engine power control method for RPM limiter. Controls timing on each cylinder and considerably reduces the turbo spool time in a transbrake/2-step rev limiter, keeps cylinders and spark plugs in conditions of maximum efficiency (they never get wet because they always fire), allow to lower the RPM limiter for launch or to make more boost at the same RPM and smoothens the 2-step limiter operation for less vibration • Pit Limit / Speed Limit • Generic outputs allow to configure up to 8 outputs by associating an input and setting up the way the output will be activated Προκαθορισμένοι αισθητήρες: • Default sensors make the configuration easier: - Oil pressure - Fuel pressure - External MAP sensor (GM 1 bar, GM 1.05 bar, GM 2 bar, GM 3 bar, GM 3.05 bar) - Nitrous bottle pressure - Clutch pressure - Wastegate pressure - Brake pressure - Back pressure - Pan Vacuum - Transmission pressure - Torque converter pressure - Engine coolant pressure - Air temperature - Engine temperature - Exhaust gas temperature (EGT) - Transmission temperature - Intercooler temperature - Tire temperature - Track temperature - Clutch position - Shock position - Wheel speed - Driveshaft RPM - Input shaft RPM - Ride height sensor - Pitch rate sensor - Flex Fuel sensor Προστασία και ειδοποιήσεις: • RPM limiter by fuel or ignition cut • Shift light with sound and dashboard alert and/or external shift light • Configurable safe mode options (RPM limit or engine shutoff): - High or low exhaust gas temperature (EGT), O2 closed loop limit, over boost, over rev, engine temperature, duty cycle, oil pressure, fuel pressure and differential fuel pressure. Λογισμικό: • FTManager has several tools and features: - Real-time map edition - Edition of the indexes of map tables - Save and read saved maps on the PC - Open maps from log files - Display fuel maps in ms, %VE, %DC and lb/h - Easy edition of time-based controls, organizing all in one screen and making it possible to use a log file as reference - ProNitrous edition aided by the stage chart - Allows converting maps of previous ECUs (FT200, FT250, FT300, FT350 and FT400) - Allows importing of some specific tables from other maps - ECU software upgrades - Splash screen customization - Engine operation in real time analysis through gauges and graphics with full screen option - Check alert and status messages - Test time-based features - Edit channels of the internal datalogger and their individual logging rates - Switch between basic (2D) or advanced (3D) maps - Edit the odometer and hourmeter - Reset the ECU to factory default - Recalibrate the touchscreen - View all devices connected to the CAN network - Receive warnings about new updates - Internet Remote Tuning allows connecting to another FTManager over the internet, for giving or receiving remote support FTDatalogger • Download and analyze log files from PowerFT ECUs • Log files comparison • Mathematical channels • Data export to CSV file • Overlay functions easily show which cell the engine was running on for better data analysis: - Fuel tables overlay - gnition tables overlay - Closed loop corrections: analyses all closed-loop compensations and suggests a correction for the fuel map • Select between light or dark background for better data visualization • Select if you want to show channels names and values on the chart or only in the preview panel • Full timeline visualization • Set log zero time (tell the log time where the car launched) • Erase your ECU datalogger memory • Trim feature for log files – make then smaller and have only the information you need FuelTech Datalog App: • Open your log files on your phone`s screen (up to 4 channels at the same time) - (Android and iOS) Γενικές λειτουργίες: • Display brightness adjustment • LED lights brightness adjustment • Night and day mode selection by external switch and through the menu • Buzzer intensity adjustment for the interface and sound alerts • Memory for saving up to 5 different maps (possibility of map selection by external button) • ECU and Map protection password, with individual full ECU or map password only, including map lock-up function that allows the current map to be saved and run exclusively on the actual ECU (ensured by serial code). Maintenance password protects the edition of the total hour meter and total odometer • PC communication through mini USB cable • Operation temperature: from -4 F to +158 F • Maximum power supply voltage: 20V
ΧΑΙΔΑΡΙ 12461, Τηλ.  Τελευταία Αλλαγή: 2 ώρες
ΣΥΛΛΕΚΤΙΚΟ AERODYNAMIC KIT- WIDE BODY KIT ΓΙΑ HONDA S2000!

ΣΥΛΛΕΚΤΙΚΟ AERODYNAMIC KIT- WIDE BODY KIT ΓΙΑ HONDA S2000! ΣΥΛΛΕΚΤΙΚΟ AERODYNAMIC KIT- WIDE BODY KIT ΓΙ...

100 €

Αυτοκινήτων » Αμάξωμα Είδη Φανοποιίας » Προφυλακτήρες
Για τις καθημερινές ειδήσεις σχετικά με εμάς αλλά και για δείγματα των υπηρεσιών μας, κάντε 'Like' στην επίσημη σελίδα μας στο Facebook! ★ http://www.facebook.com/KIROS.design ★ ●Περιγραφή Προϊόντος: ▪ Wide body kit της KIROS Automotive Design για Honda S2000. Το αεροδυναμικό πακέτο αποτελείται από: - εμπρόσθιο "φουσκωμένο" προφυλακτήρα - φουσκώματα/ επεκτάσεις εμπρός φτερών (σετ) - φουσκώματα/ επεκτάσεις οπίσθιου προφυλακτήρα (ΑP1) (σετ) - φουσκώματα/ επεκτάσεις οπίσθιων φτερών (σετ) - φουσκώματα/ επεκτάσεις θυρών (σετ) - πλαινά μαρσπιέ (σετ) - αεροτομή πίσω καπό Περιορισμένη διαθεσιμότητα. Μόνο 10 αεροδυναμικά πακέτα για την Ελλάδα!!! Η οπτική αναβάθμιση του S2000 γίνεται με εξαιρετική προσοχή στο όχημα και με κορυφαία υλικά. Μεγάλη έμφαση δίνεται στην υψηλή ποιότητα των πρώτων υλών και στην λεπτομέρεια της εργασίας. Όλα δημιουργούνται με σχολαστική χειροποίητη εργασία από έμπειρο και εξειδικευμένο προσωπικό στις ιδιόκτητες εγκαταστάσεις μας, όπως αρμόζει σε ένα συλλεκτικό όχημα! Παρέχεται πιστοποιητικό- γραπτή εγγύηση για όλες τις εργασίες βαφής που πραγματοποιούνται στο όχημα! ●Πρόσθετες Πληροφορίες: ▪ Yλικό κατασκευής: FRP ▪ Διαθεσιμότητα: Ρωτήστε μας ▪ Χρόνος παράδοσης: Ρωτήστε μας ●Ενδεικτική Τιμή Αγοράς: Ρωτήστε μας ■Επίσης αναλαμβάνουμε την βαφή και τοποθέτηση των προϊόντων με κάποια επιβάρυνση στην τιμή. ■Ενώ μπορείτε να τα παραλάβετε και να τα τοποθετήσετε σε συνεργείο της αρεσκείας σας. ●Τρόποι Πληρωμής: √ Πληρωμή με Τραπεζική Κατάθεση (Alpha Bank ή Τράπεζα Πειραιώς) √ Πληρωμή με Πιστωτική Κάρτα (VISA, MasterCard, AMERICAN EXPRESS, DISCOVER - μέσω Paypal) √ Πληρωμή με Paypal √ Πληρωμή με Αντικαταβολή (Διαθέσιμη μόνο για την Ελλάδα) √ Πληρωμή με Mετρητά (Παραλαβή απο το κατάστημα μας) ●Αποστολή σε: √ Όλη την Ελλάδα √ Όλες τις χώρες του εξωτερικού ●Τρόποι Αποστολής: √ Aποστολή με Courier (ΑCS ή ΕΛΤΑ - Για MΗ ογκώδη φορτία) √ Αποστολή με ΕΛΤΑ (Για ογκώδη φορτία ή μη ογκώδη φορτία) √ Αποστολή με Ιδιωτική Μεταφορική Εταιρία (Για ογκώδη φορτία) √ Αποστολή στο Εξωτερικό (ΕΛΤΑ, ΕΛΤΑ Courier, ΤΝΤ & FedEx) ●Δικαίωμα Επιστροφής: √ Μπορείτε να επιστρέψετε ένα προϊόν και να σας καταβάλλουμε το τίμημα εντός 14 ημερολογιακών ημερών από την παραλαβή του προϊόντος. Τα έξοδα αποστολής της επιστροφής του προϊόντος επιβαρύνουν τον πελάτη. Στα επιστρεφόμενα χρήματα δεν περιλαμβάνονται έξοδα αρχικής αποστολής σε εσάς. ●Γιατί να επιλέξετε εμάς: √ Μακροχρόνια Εμπειρία | Από 1979 στον τομέα της Βελτίωσης √ Μόνο Προσεκτικά Επιλεγμένες Εταιρίες & Προϊόντα √ Αποστολή Προϊόντων Παγκοσμίως √ 18-ωρη Εξυπηρέτηση Πελατών √ Ελκυστικές Τιμές √ Άριστη Ποιότητα Προϊόντων & Υπηρεσιών √ Επαγγελματικές Υπηρεσίες Εγκατάστασης των Προϊόντων που Πουλάμε ■Για περισσότερες πληροφορίες μην διστάσετε να επικοινωνήσετε μαζί μας. Θα χαρούμε να σας εξυπηρετήσουμε. Γίνετε θαυμαστές στην επίσημη σελίδα μας στο Facebook... Με αυτόν τον τρόπο μπορείτε να επωφελειθείτε από τις ειδικές προσφορές/εκπτώσεις σε προϊόντα και υπηρεσίες που προσφέρει η ΚIROS Automotive Design σε διαφορετικές χρονικές περιόδους! ★ http://www.facebook.com/KIROS.design ★
ΝΕΑ ΤΡΙΓΛΙΑ 63079, Τηλ.  Τελευταία Αλλαγή: 21 ώρες
Fueltech FT450 digital dash display 4,3" + ECU (άγραφος εγκέφαλος)

Fueltech FT450 digital dash display 4,3" + ECU (άγραφος εγκέφαλος) Fueltech FT450 digital dash display 4,3" + E...

1.250 €

Αυτοκινήτων » Ηλεκτρικά - Ηλεκρονικά » Εγκέφαλος + Κίτ
Προδιαγραφές: • Otto cycle engine control for 1, 2, 3, 4, 5, 6, 8, 10 and 12 cylinders • Wankel engine control (rotary) for 2 rotors • Full sequential ignition control, semi-sequential and multipoint control • Ignition control through trigger wheel or distributor • Full sequential ignition or wasted spark • Closed loop injection through oxygen sensor (wide band lambda sensor)1 • AMP SUPERSEAL automotive connectors • Ignition timing and actuator based Idle control (PWM valve) • Real-time adjustable maps on the screen and on the FTManager software (including internet remote tuning) • Waterproof sealed case made from polished ABS Είσοδοι: • Differential input for RPM signal • Differential input for cam sync signal (including multi-teeth cam sync triggers) • 7 input channels fully customizable – digital and analog (temperature, pressure, speed and position sensors, TPS, external MAP, buttons, keys, etc.) - Adjustable sensor reading scale • Internal MAP sensor of 7 bar (1 bar vacuum and 6 bar positive pressure) • 1 USB port for computer and FuelTech software connection - FuelTech equipment: WB-O2 Nano, EGT-8 CAN, FTSPARK and SwitchPanel-8 - Third party equipment: Racepak IQ3, VNET, etc) - OEM CAN partial compatibility with: C6 Corvette, C7 Corvette, 5th gen Camaro, 2009 CTS-V Cadillac Έξοδοι: • Total of 10 general-purpose outputs: (all of which can be used for general accessories as fuel pump, thermatic fans, valves or injectors for BoostController, solenoids, etc.) - 6 open collector outputs: recommended for high impedance injectors (up to 4 injectors per output) – it is possible to set up to 10 outputs using external FuelTech Peak and Hold driver - 5 open collector outputs with a 5V current source: recommended for ignition control Οθόνη: • Screen dashboard which displays different sizes and styles to be used with any existing equipment or sensor • Dashboard can have up to 4 screens with navigation through the screen or an external button • Virtual LEDs with combined activations for up to 3 conditions • Diagnostic panel with real-time information of all inputs, outputs, CAN, Status Events and engine diagnostics • Customizable splash screen allows the user to select the image shown on the FT450 start up screen Ρυθμίσεις ψεκασμού: • Full sequential injection for up to 10 outputs • Closed loop fuel control through O2 sensor (wide band sensor) (An external wide band lambda sensor conditioner is required – FuelTech WB-O2 Nano, Alcohol-O2, WBO2 Datalogger, etc.) • 2 injection banks (Bank A and bank B) • Primary map though MAP, TPS or RPM • Advanced 3D primary map with up to 32x32 cells (completely adjustable map index and size) • Simplified 2D map with up to 1x32 cells by MAP or TPS and RPM compensation of up to 1x32 cells (completely adjustable map index and size) • Injection time resolution of 0,001ms • Acceleration fuel enrichment and decay adjustment • Individual cylinder trim setting by MAP or RPM • Injector compensation through: - Engine temperature - Air temperature - Battery tension (individual per bank) - TPS or MAP • Starting engine map with the engine temperature • Prime pulse table • Post start enrichment • Gear based fuel compensation • Gear shift fuel compensation • Fuel injection angle table • Injectors deadtime compensation by battery voltage Ρυθμίσεις ανάφλεξης: • Sequential ignition for up to 5 cylinders • Main map by MAP, TPS or RPM • Advanced 3D primary map with up to 32x32 cells (completely adjustable map index and size) • Simplified 2D map with up to 1x32 cells per MAP or TPS and RPM compensation of up to 1x32 cells (completely adjustable map index and size) • Injection angle resolution of 0,01° • Individual cylinder injection settings • Ignition timing compensation by air temperature • Ignition timing compensation by engine temperature • Gear based timing compensation • Gear shift timing compensation Internal Datalogger: • Multiple session recording (files) logs up to 256 channels • Simplified mode with sample rate of 25, 50, 100 or 200Hz • Advanced mode allows individual settings for the sample rate with 1, 5, 25, 50, 100 or 200Hz • Automatic activation by RPM, through the screen or by external button • Data storage for up to 2h50min (24 channels at 25Hz) • FTManager Datalogger Software for viewing and comparing logs Drag racing χαρακτηριστικά: • Burnout mode, 2-step, 3-step (including Roll Start) • 2-step activation by speed, boost, MAP or clutch position • Line lock brake output • Brake pressure control by line lock • Ignition timing map for drag Racing features • Time based RPM limiter by timing retard or ignition cut • Time based wheel speed or driveshaft RPM control with timing retard or ignition cut • Time-based ignition timing compensation • Time-based fuel compensation • Pro-Nitrous setting for up to 6 stages, with activation control, fuel enrichment and ignition timing maps • Gear shift output • Time based output • Staging control • Wheelie Control Χαρακτηριστικά αυτοκινήτων δρόμου: • Total and trip hour meter • Total and trip odometer • High and low beam • Right and left turn signals • Pit Limit / Speed Limit • START/STOP button Δευτερεύουσες λειτουργίες: • Integrated BoostController: wastegate valve pressure control • Idle speed control by timing and/or PWM valve • Deceleration fuel cutoff • Control of up to two thermatic fans activated by engine temperature and by the A/C, one of the outputs can drive a solid state using PWM control for soft starting the fans • Air conditioning control • Fuel pump control – with 6s prime • Variable Valve Timing (VTEC) control • Progressive nitrous control with fuel enrichment and timing retard • Generic duty cycle – PWM control • Boost activated output • RPM activated output • Different options for gear detection: RPM drop, analogic sensor, pulse, speed and gear ratio or by gear shift output • Start button. Allows to start and shut down the engine via a relay connected to an output switching the starter • Cold start with external reservoir • Active traction control keeps wheel slip on ideal levels for maximum traction, thus adapting the available traction conditions as it seeks to maintain the programmed wheel speed difference by reading traction wheel and reference wheel speed difference • Hi-resolution engine power control method for RPM limiter. Controls timing on each cylinder and considerably reduces the turbo spool time in a transbrake/2-step rev limiter, keeps cylinders and spark plugs in conditions of maximum efficiency (they never get wet because they always fire), allow to lower the RPM limiter for launch or to make more boost at the same RPM and smoothens the 2-step limiter operation for less vibration • Pit Limit / Speed Limit • Generic outputs allow to configure up to 8 outputs by associating an input and setting up the way the output will be activated Προκαθορισμένοι αισθητήρες: • Default sensors make the configuration easier: - Oil pressure - Fuel pressure - External MAP sensor (GM 1 bar, GM 1.05 bar, GM 2 bar, GM 3 bar, GM 3.05 bar) - Nitrous bottle pressure - Clutch pressure - Wastegate pressure - Brake pressure - Back pressure - Pan Vacuum - Transmission pressure - Torque converter pressure - Engine coolant pressure - Air temperature - Engine temperature - Exhaust gas temperature (EGT) - Transmission temperature - Intercooler temperature - Tire temperature - Track temperature - Clutch position - Shock position - Wheel speed - Driveshaft RPM - Input shaft RPM - Ride height sensor - Pitch rate sensor - Flex Fuel sensor Προστασία και ειδοποιήσεις: • RPM limiter by fuel or ignition cut • Shift light with sound and dashboard alert and/or external shift light • Configurable safe mode options (RPM limit or engine shutoff): - High or low exhaust gas temperature (EGT), O2 closed loop limit, over boost, over rev, engine temperature, duty cycle, oil pressure, fuel pressure and differential fuel pressure Λογισμικό: • FTManager has several tools and features: • Real-time map edition • Edition of the indexes of map tables • Save and read saved maps on the PC • Open maps from log files • Display fuel maps in ms, %VE, %DC and lb/h • Easy edition of time-based controls, organizing all in one screen and making it possible to use a log file as reference • ProNitrous edition aided by the stage chart • Allows converting maps of previous ECUs (FT200, FT250, FT300, FT350 and FT400) • Allows importing of some specific tables from other maps • ECU software upgrades • Splash screen customization • Engine operation in real time analysis through gauges and graphics with full screen option • Check alert and status messages • Test time-based features • Edit channels of the internal datalogger and their individual logging rates • Switch between basic (2D) or advanced (3D) maps • Edit the odometer and hourmeter • Reset the ECU to factory default • Recalibrate the touchscreen • View all devices connected to the CAN network • Receive warnings about new updates • Internet Remote Tuning allows connecting to another FTManager over the internet, for giving or receiving remote support FTDatalogger • Download and analyze log files from PowerFT ECUs • Log files comparison • Mathematical channels • Data export to CSV file • Overlay functions easily show which cell the engine was running on for better data analysis: - Fuel tables overlay - Ignition tables overlay - Closed loop corrections: analyses all closed-loop compensations and suggests a correction for the fuel map • Select between light or dark background for better data visualization • Select if you want to show channels names and values on the chart or only in the preview panel • Full timeline visualization • Set log zero time (tell the log time where the car launched) • Erase your ECU datalogger memory • Trim feature for log files – make then smaller and have only the information you need • FuelTech Datalog App: - Open your log files on your phone`s screen (up to 4 channels at the same time) - (Android and iOS) Γενικές λειτουργίες: • Display brightness adjustment • LED lights brightness adjustment • Night and day mode selection by external switch and through the menu • Buzzer intensity adjustment for the interface and sound alerts • Memory for saving up to 5 different maps (possibility of map selection by external button) • ECU and Map protection password, with individual full ECU or map password only, including map lock-up function that allows the current map to be saved and run exclusively on the actual ECU (ensured by serial code). Maintenance password protects the edition of the total hour meter and total odometer • PC communication through mini USB cable • Operation temperature: from -4 F to +158 F • Maximum power supply voltage: 20V
ΧΑΙΔΑΡΙ 12461, Τηλ.  Τελευταία Αλλαγή: 1 μέρα