This is an amplifier suitable for full in-car entertainment systems.
Nominal output of 4 x 50 Watts + 1 x 170 Watts on a mono sub channel.
Built-in low pass and high pass filters.
Variable phase shift control on the sub channel.
Built-in protection circuits shut down the amplifier in the event of overloads.
High level input with auto start.
RMS output power @ 13,8 V, 20Hz - 20 kHz
Number of channels: 5
Amplifier class: AB
Output power: in 4 ohm 4 x 50 W RMS
Output power: in 2 ohm 4 x 80 W RMS
Mono bridge mode: 4 ohm 2 x 150 W RMS
Mono sub channel: 4 ohm 170 W
Mono sub channel: 2 ohm 225 W
Damping factor: > 100
S/N ratio, A-weighted: > 100 dB
Frequency range: 10 Hz - 35 kHz
Input sensitivity: 0,25 - 5 V
Input impedance: > 10 kohm
Input impedance, high level: 100 ohm
Filters channel A & B: HP: 15-500 Hz. LP: 50-500 Hz / 05 - 5 kHz (x10)
Low level output: No
Filters channel C & D: HP: 15-500 Hz / 150 Hz - 5 kHz (x10).
Filters channel E: LP: 60 - 120 Hz + subsonic 25 Hz
Phase control for subwoofers: 0-180 degrees cont. variable
High level input with auto start: Yes
Power consumption (idle): 1 A
Power consumption (max): 90 A
Rec. power cable Minimum 4AWG / 21 mm2
Fuses: 3 x 30 A
Dimension (W x D x H): 70 x 437 x 268 mm / 2,92 x 17,2 x 10,55 "
Weight: 5 kg / 11 lb